Post Consumer Plastic PP PE Film Woven Bags Crushing Washing Squeezing Drying Recycling Line

Post Consumer Plastic PP PE Film Woven Bags Crushing Washing Squeezing Drying Recycling Line

Post-industrial or post-consumer plastic materials are used, mixed and contaminated. They must be with a lot of dirts like sand,soil,etc. In order to reuse and recycle waste plastics,we should make a proper step for plastic recycling. You can deal with this job effectively with a washing line from RETECH Machinery.

With heavy duty shredders and wet washing granulators we wash and size reduce plastic materials, separating out the coarser impurities in our pre-washing sections. Our floating separation tanks and high speed friction washer steps separate different types of plastic according to their specific weight. In case of particularly stubborn contamination we use our hot washing to remove. Mechanical (centrifugal) dryers and hot air drying make clean material capable of extrusion. Washed films, woven bags can be also dried with the aid of an film squeezer.

High density plastics or low density plastic materials could separated by pure water(density=1),or it is working by salt water(density>1),it is combine some magnets,metal detectors,screening,label removers to get a recycling flow.

We supply completely plastic washing lines+pelletizing lines, as well as single unit components for existing recycling systems.

Applications:

Agricultural films,Packaging films,Stretch films,PP tape bags (big-bags, raffia),PET bottles,Bottles made of polyolefins,Fruit vegetable and bottle crates,Hard plastics of all types,Plastics from car recycling,Waste from electrical devices (WEEE),Containers and barrels,Old PVC windows,Battery casies.

Models:

Features:

We supply plastic recycling machines and systems for washing, separation and drying for used, contaminated and mixed plastics. The lines start off with waste material – usually pressed in bales – and end up with clean, pure and dry regrind or flakes, ready for pelletizing, re-extrusion or injection moulding.
Our plastic washing lines have been designed in a particular sequence in order to achieve, after every process stage, an improved quality of the flakes, to save energy and to reduce the amount of fresh water required for the end product. In modular design from simple wet shredding to the turnkey industrial plastic washing line.